Browse A-Trend ATC Motherboard owner’s manuals, user guides, instructional help documents & operating information to learn more about your product. Show content of zip %zip% from thread %a-trend ATC drivers% File manual cannot solve all your problems, please ask your dealer for help. ATC A-TREND ATREND Motherboards Mainboards Drivers Manuals BIOS Motherboard, mainboard, chipset, základní desky, Slot, Socket, information.
|Published (Last):||19 October 2006|
|PDF File Size:||15.98 Mb|
|ePub File Size:||3.41 Mb|
|Price:||Free* [*Free Regsitration Required]|
Quit and not save changes Setup menu: Fast Typematic Rate Setting: Auto IR Transmission Delay: However it is optional depending on chipset design. The system board designer should set the values in this field, depending on the DRAM installed.
Download file %zip% from thread %a-trend ATC drivers%
Enabled Activates automatically when the system boots up. If set to Auto, system will assign an IRQ for it. Old Values Shift F2: First, you should connect the power switch cable to the connector “PS-ON” on the mainboard.
All Errors Total Memory: Turn on the system. The updated BIOS utility includes: The timings programmed into this register are dependent on the system design. Built-in Hardware Health Monitor chip. Power Saving” or “Max. One is Intel and the other is with PME signal supporting.
However, this capability means absolutely nothing unless you are using a Plug and Play OS such as Windows Livin on the Dark Side.
Type ‘user’ which is user-definable. Do not slide the mouse when you click; or you can’t power on the system. The features of LDCM are as following: Another way is to set Jumper 11 at ‘open’ and the system can be operated with a higher frequency than the nominal one on CPU.
A-Trend ATC 6220 – motherboard – ATX – Slot 1 – i440BX
This function enables users to access their computer data from anywhere in the world. Some of these items are software related, while many others are hardware related.
All other brands and product names are registered trademarks of their respective companies. Disabled Video Off After: In case CMOS should be cleared, unplug the power cord, set Jumper 8 closed for at least 5 seconds, put it back to position and plug the power cord again. After power off, the system will automatically power on at the specified date and time. Atc–6220 and Exit Setup. If an attempt is made, the BIOS will halt the system and the following error message will appear.
This the motherboard you looking for?
Stock Win98SE drivers will work. Install peripheral devices, add-on card drivers and test them.
Disabled IDE controller uses standard mode. Disabled Video Off Method: If all of above procedures are running successfully, turn the power off and screw the chassis cover to the chassis, and then connect external devices which are cabled to the system. Today, while atc-620 still provide this support, it is more common and much faster for the system chipset to provide support for gate A